SOYO SY-K7ADA XP User Manual page 36

Hardware Installation
4. Cooling Fan Installation
(1) CPU Cooling Fan
After you have seated the CPU properly on the processor, attach the 3-pin
fan cable to the CPUFAN connector on the Motherboard. The fan will stop
when the system enters into Suspend Mode. (Suspend mode can be
enabled from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)
To avoid damage to the system, install according to the following pin
assignment:
GND
CPU Cooling Fan
CPUFAN Pin Assignment
1 2
12V
3
SENSOR
32
SY-K7ADA XP