Hardware Installation
SY-K7ADA XP
2. Infrared
Plug infrared device cable to the SIRCON header. This will enable the
infrared transfer function. This Motherboard meets both the IrDA 1.0 (SIR)
and IrDA 1.1 (FIR and MIR) specifications. Supports sharp-IR.
Please install according to the following pin assignment:
Standard Infrared
(SIRCON) Connector
SIRCON Pin Assignment
1 2 3 4 5 6
OVCROFF
IRRX
IRTX
+5V
GND
3. Other Display Cards
Insert other types of VGA cards into the PCI or ISA expansion slots
according to card specifications.
31