Advertisement
FOR AUSTRALIA AND NEW ZEALAND:
Instructions for Use and Care
(a) No helmet can protect the wearer against
all possible impacts.
(b) The helmet is designed to be retained
by a strap under the lower jaw.
(c) To be effective, a helmet must fit and be worn
correctly. To check for correct fit, place helmet
on head and make any adjustments indicated.
Securely fasten retention system. Grasp the
helmet and try to rotate it to the front and rear.
A correctly fitted helmet should be comfortable
and should not move forward to obscure vision
or rearward to expose the forehead.
(d) No attachments should be made to the helmet
except those recommended by the helmet
manufacturer.
(e) The helmet is designed to absorb shock
by partial destruction of the shell and liner.
This damage may not be visible. Therefore,
if subjected to a severe blow, the helmet
should be destroyed and replaced even
if it appears undamaged.
(f) The helmet may be damaged and rendered
ineffective by petroleum and petroleum products,
cleaning agents, paints, adhesives and the like,
without the damage being visible to the user.
(g) A helmet has a limited lifespan in use and should
be replaced when it shows obvious signs of wear.
Advertisement
