Uniden D1780 User Manual page 9

To...
mute the microphone during
a call
put a call on hold
return to a call on hold
make a speed dial call
* After 5 minutes on hold, the call will be disconnected.
Assigning a Speed Dial Number
You can assign a speed dial number to a phonebook entry when you create
that entry for the first time or when you edit it. Press
Create New. As you enter the phonebook number, one of the options you
will see is to assign a speed dial number to that phonebook entry. You can
assign up to 10 speed dials, 0 - 9.
Finding a Lost Handset
With the phone in standby, press
1 minute; to cancel, press
Changing the Volume
To change the...
earpiece or speaker
volume for each handset
base speaker volume
ringer volume for each
handset or the base*
* If you turn the ringer all the way down, that particular ringer turns off.
Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that
shows the phone number (and sometimes the caller's name) of incoming
calls. Contact your telephone provider for more information.
Using the
earpiece
press
MEssagE/MuTE
microphone back on).
press
inTErcoM/clEar*
press
Talk/flash
press and hold the speed dial number
for 1.5 seconds. After you verify that the
system is displaying the correct phonebook
data for that speed dial number, press
or
flash sPEakEr
on the base. All handsets beep for
find hs
again or press any handset key.
find hs
When...
you are listening to that
earpiece or speaker (playing
messages, etc.)
the phone is in standby
Using the
speakerphone
(press again to turn the
.
. press .
sPEakEr
on the handset.
and select
PhonEbook
Press...
to increase
uP
the volume.
to
down
decrease it.
English - 9
Talk/