Charging; Optimising The Lifetime Of The Rechargeable Battery - Philips Philishave Turbovac HQT863 User Manual

Vacuum beard trimmer
Hide thumbs Also See for Philishave Turbovac HQT863:
Table of Contents

Advertisement

Available languages

Available languages

Keep the appliance out of the reach of children.
Charge, use and store the appliance at a temperature between
15cC and 35cC.
This appliance is only designed for trimming the human beard. Do
not use the appliance for any other purpose.
Do not use the appliance when the cutting unit is damaged or
broken, as this may cause injury.
If the powerplug is damaged, always have it replaced by one of the
original type in order to avoid a hazard.

Charging

This appliance does not run from the mains!
Charge the appliance fully before you start using it for the first time or
after a long period of disuse.
1
Make sure the appliance is switched off before you start charging
it.
2
Insert the appliance plug into the appliance and put the
powerplug in the wall socket.
The green pilot light goes on to indicate that the appliance is
charging (fig. 2).
It will take approx. 10 hours to fully charge the battery.
A fully charged appliance has a cordless trimming time of up to
40 minutes.
When the appliance has been charged for the first time, we advise you
B
to use it until the battery is completely empty.
For a single trimming session the appliance must be charged for at
B
least 90 minutes.

Optimising the lifetime of the rechargeable battery

-
After the appliance has been charged for the first time, use it until
the battery is completely empty.
-
Do not charge the appliance for more than 24 hours.
ENGLISH
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents