KitchenAid KFGS306VSS Technical Education page 20

2. Remove the control knob.
3. Remove the black rubber grommet.
4. Using needle-nose pliers, remove the gray
shield inside the burner valve opening.
A. Control knob
B. Black rubber grommet
C. Gray shield
5. Tighten screw "A" to reduce flame height.
Loosen screw to increase flame height.
A
A. Adjustment screw - inner crown
B. Adjustment screw - outer crown
6. Replace the control knob.
7. Set the outer crown flame to LO.
8. Remove the control knob.
9. Tighten screw "B" to reduce flame height.
Loosen screw to increase flame height.
10. Replace the gray shield. Use a screwdriver
to help push the shield into place.
11. Replace the black rubber grommet.
A
B
C
B
12. Replace the control knob.
13. Test the flame by turning the control from
LO to HI, checking the flame at each
setting.
If you need Assistance or Service:
Please reference the "Assistance or Service"
section of the Use and Care Guide or contact
the dealer from whom you purchased your
cooktop.
2-10