Aspect - Panasonic TH-P50ST60Z Quick Manual

Watching
No operation is performed for 4 hours while
●
Settings
No signal is received and no operation is performed for 10 minutes while
●
No signal Power off
Settings
= Note =
This function does not affect the recording of
●

Aspect

Change the aspect ratio (image size) with ASPECT.
Enjoy viewing the image at its optimum size and aspect.
●
■
To change the aspect ratio manually
1. Display Aspect Selection
2. Select the mode with
You can also change the mode pressing ASPECT.
●
(Press repeatedly until you reach the desired mode.)
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
14:9:
Displays the image at the standard 14:9 without distortion.
Just:
Displays a 4:3 image full-screen. Stretching is only noticeable at the left
and right edges.
4:3:
Displays the image at the standard 4:3 without distortion.
Zoom:
Displays a 16:9 letterbox or 4:3 image without distortion.
4:3 Full:
Displays a 4:3 image enlarged horizontally to fit the screen.
For HD (High definition) signals
●
Sidecut Just:
Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching is
only noticeable at the left and right edges.
Basic Off Timer
Timer Auto Standby
is set to On.
Timer No signal Power off
list with ASPECT
/ and press
- 27 -
Auto Standby is set to On.
One Touch Recording.
OK to set