Panasonic TH-P50ST60Z Quick Manual page 142

Mono:
When stereo signal cannot be received
M1 / M2:
Available while mono signal is transmitted.
For Analogue TV
●
When you receive the stereo / bilingual sound system, sound output modes
can be selected by using the
Meanings of mode indicators
●
: STEREO
: MAIN I
: SUB II
: MONO
■
Available mode indicator for each type of broadcast
NICAM - Used in New Zealand, Singapore, Hong Kong, etc.
●
– Regular broadcast (Standard Audio): No indicator /
– Regular + NICAM MONO I (MAIN I):
– NICAM STEREO:
– NICAM DUAL MONO (MAIN I / SUB II):
A2 (German) - Used in Australia, Malaysia, etc.
●
– Regular broadcast (Standard Audio): No Indicator /
– BILINGUAL or DUAL MONO (MAIN I / SUB II):
– STEREO:
= Note =
If the stereo signal is poor or the receiving conditions are not optimum or if
●
STEREO:MONO automatic switching occurs, it is recommended to switch
from STEREO to MONO.
Even when the contents of the receiving signal undergo changes,
●
selection mode is kept intact.
When the receiving conditions deteriorate, listening will be easier if the
●
mode is set to the MONO position pressing the Sound Selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently
●
transmitted in some countries.
Digital Audio Preference
MPX in the Sound Menu.
/
/
- 142 -
/
/ /
/