DirecTV Plus HD User Manual page 67

Increase the separation between the equipment and the DIRECTV Receiver.
Connect the equipment into an outlet on a circuit different from that to which the DIRECTV Receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could
void the user's authority to operate the equipment.
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify
and Resolve Radio and TV Interference Problems." This booklet is available from the U.S. Government Printing Office,
Washington, DC. To meet FCC requirements, only peripherals (computer input/output devices, terminals, printers, etc.) cer-
tified to comply with Class B limits may be attached to this device. Operation with non-certified peripherals is likely to result
in interference to radio and TV reception. To meet FCC requirements, shielded cables are required to connect the device to a
personal computer, peripheral, or other Class B certified device.
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the back of this equip-
ment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be
provided to your telephone company. This equipment uses the following USOC Jack: RJ11C. A plug and jack used to con-
nect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed
to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may connect to a telephone line. Excessive RENs on a telephone
line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of the RENs
should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local
telephone company. The REN for this product is part of the product identifier that has the format US: AAAEQ##TXXXX.
The digits represented by ## are the REN without the decimal point (e.g., 03 is a REN of 0.3).
58