В. Updating the BIOS
When updating the BIOS, choose the location where the BIOS file is saved. The follow procedure
assumes that you save the BIOS file to a floppy disk.
Step 1:
1.
Insert the floppy disk containing the BIOS file into the floppy disk drive. In the main menu of Q-
Flash, use the up or down arrow key to select Update BIOS from Drive and press <Enter>.
*
The Save Main BIOS t o D r i v e option allows you to save the current BIOS file.
NOTi^-" •
Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.
•
If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive
attached to an independent IDE/SATA controller, use the <End> key during the POST to
access Q - F l a s h .
2.
Select F l o p p y A and press <Enter>.
Q - F l a s h U t i l i t y v 2 . 0 2
F l a s h T y p e / S i z e
S S T 2 5 V F 0 4 0 B
K e e p D M I D a t a
E n a b l e
U p d a t e B I O S f r o m D r i v e
""""""
0 f i l e ( s ) f o u n d
— —
F l o p p y A
< D r i v e >
H D D 0-0
< D r i v e >
Totai s i z e : 0
Free, size
0
3.
Select the BIOS update file and press <Enter>.
Make sure the BIOS update file matches your motherboard model.
CAUTION
Step 2:
The process of the system reading the BIOS file from the floppy disk is displayed on the screen. When
the message "Are you sure to update BIOS?" appears, press <Enter> to begin the BIOS update. The
monitor will display the update process.
•
Do not turn off or restart the system when the system is reading/updating the BIOS.
/
* \ •
Do not remove the floppy disk, USB flash drive, or hard drive when the system is updating
the BIOS.
Step 3:
When the update process is complete, press any key to return to the main menu.
Q - F l a s h U t i l i t y v 2 . 0 2
F l a s h T y p e / S i z e
S S T 2 5 V F 0 4 0 B
5 1 2 K
!! Copy BIOS completed - Pass !!
E
Please press any key to continue
e r O f f
- 63 -
Unique Features