Gigabyte GA-945GCM-S2L User Manual page 37

The following fields display your hard drive specifications. If you wish to enter the parameters
manually, refer to the information on the hard drive.
Approximate capacity of the currently installed hard drive.
Number of cylinders.
Number of heads.
Write precompensation cylinder.
Landing zone.
Number of sectors.
• • Capacity
• • Cylinder
• • Head
• • Precomp
• • Landing Zone
•• Sector
Drive A
Allows you to selects the type of floppy disk drive installed in your system. If you do not install a
floppy disk drive, set this item to None. Options are: None, 360K/5.25", 1.2M/5.25", 720K/3.5",
1.44M/3.5", 2.88M/3.5".
Floppy 3 Mode Support
Allows you to specify whether the installed floppy disk drive is 3 - m o d e floppy disk drive, a
Japanese standard floppy disk drive. Options are: Disabled (default), Drive A.
Halt on
Allows you to determine whether the system will stop for an error during the POST.
•• No Errors The system boot will not stop for any error.
•• All Errors Whenever the BIOS detects a non-fatal error the system boot will stop.
• • All, But Keyboard The system boot will not stop for a keyboard error but stop for all other
errors. (Default)
• • All, But Diskette The system boot will not stop for a floppy disk drive error but stop for all
other errors.
• • All, But Disk/Key The system boot will not stop for a keyboard or a floppy disk drive error but
it will stop for all other errors.
Memory
These fields are read-only and are determined by the BIOS POST.
• • Base Memory Also called conventional memory. Typically, 640 KB will be reserved for
the MS-DOS operating system.
• • Extended Memory The amount of extended memory.
GA-945GCM-S2L/S2C Motherboard - 36 -