Radio Shack AM/FM Stereo Cassette Player with Auto Reverse Owner's Manual page 12

• Always connect the AC or DC
adapter to the cassette player before
you connect it to the power source.
When you finish, disconnect the
adapter from AC or DC power before
you disconnect it from the cassette
player.
1. Set the adapter's voltage switch to
3V, if necessary.
2. Connect the Adaptaplug to the AC or
DC adapter's cord so the tip reads
TIP +.
3. Insert the barrel plug into the cas-
sette player's
DC 3V
connects internal batteries.
4. Depending on the type of adapter
you are using, plug the other end of
12
Preparation
jack. This dis-