Tools And Supplies Needed; Inspect Fireplace And Components - Heat & Glo NorthStar-BK Owner's Manual

D. Tools and Supplies Needed
Before beginning the installation be sure the following tools
and building supplies are available:
Reciprocating saw
Pliers
Hammer
Phillips screwdriver
Flat blade screwdriver
Plumb line
Level
1/2-3/4 in. length, #6 or #8 self-drilling screws
Misc. screws and nails
CAUTION
• Keep fireplace dry.
• Mold or rust may cause odors.
September 1, 2008 September 1, 2008
Framing material
High temp caulking material
Gloves
Framing square
Electric drill and bits
Safety glasses
Tape measure
Heat & Glo • NorthStar EPA Fireplace • 480-1081C
E. Inspect Fireplace and Components
WARNING
Fire Risk
Explosion Risk
Inspect fireplace and components for
damage. Damaged parts may impair safe
operation.
• Do NOT install damaged components.
• Do NOT install incomplete components.
• Do NOT install substitute components
Report damaged parts to dealer.
• Carefully remove the fireplace and components from the
packaging.
• Doors are shipped on the fireplace.
• Report to your dealer any parts damaged in shipment.
WARNING
Fire Risk.
• Do not operate appliance before reading and
understanding operating instructions.
• Failure to operate appliance properly may
cause a house fire.
Page 9