Clearances - Heatilator GDST5244I Owner's Manual

C. Clearances
NOTICE: Install appliance on hard metal or wood surfaces
extending full width and depth. DO NOT install directly on
carpeting, vinyl, tile or any combustible material other than
wood.
WARNING! Risk of Fire! Maintain specifi ed air space
clearances to appliance and vent pipe:
• Insulation and other materials must be secured to
prevent accidental contact.
• The chase must be properly blocked to prevent blown
insulation or other combustibles from entering and
making contact with fi replace or chimney.
• Failure to maintain airspace may cause overheating and
a fi re.
Combustible flooring may be installed
next to the front of the appliance.
30 in. (762 mm)
to ceiling
36 in.
(914 mm)
Figure 5.2 Clearances to Combustibles
18
1/2 in.
(13 mm)
Drywall
(top)
0 in. TO LEVEL
OF STANDOFFS
0 in.
A
Rough Opening
Width
in 53-1/8
mm 1349
Heatilator • GDST5244I • 4045-127 • Rev W • 11/08
C
A
B C
Rough Opening Rough Opening
Height Depth
44-1/2 23
1127 584
D
B
D
Rough Opening
for Venting
10 (DVP) - 9 (SLP)
254 (DVP) - 229 (SLP)