Radio Shack Pro-2045 Owner's Manual page 13

20-418.fm Page 13 Wednesday, August 4, 1999 12:42 PM
2. Remove the scanner's top cover.
3. Gently plug the CTCSS board into
sockets and
J9
the scanner's circuit board.
CTCSS Board
CTCSS BORD
4. Replace the scanner's top cover,
then replace the two side screws
and three bottom screws.
Note: For information about using
CTCSS, see "Using CTCSS" on
Page 30.
on the top of
J10
13