Adjusting The Playback Level - Roland FR-3X V-Accordion Owner's Manual

FR-3x V-Accordion
Using the FR-3x's audio player
2.
If necessary, use treble register [3] or [4]
(PARAM LIST) to select the following param-
eter:
NOTE
Pressing registers [3] and [4] (PARAM LIST) simultaneously
will select the first parameter, "AUd".
3.
Use register [1] (√ VALUE) or [2]
(VALUE ®) to select the desired audio file.
(In the example above, the display shows the first
three characters of a file called "Scarborough.mp3".)
The display shows the first three characters of the file
name you selected. If you select another audio file
while playback of the previously selected file is still
running, the audio player stops. See page 70 for how
the FR-3x displays the characters of the selected file
name.
To check whether you have selected the correct audio
file, start playback ([ORGAN/ORCHESTRA] + [0]).
NOTE
The audio files are displayed based on the following sorting
order: numbers, capital letters, small letters.
NOTE
You can only select audio files in the USB memory's root
directory. Audio files inside folders are not detected.
4.
Press the [SET] register to leave the FR-3x's
PARAMETER mode.
36

Adjusting the playback level

1.
Press and hold the [SET] register to enter
PARAMETER mode.
The display shows the name of the last parameter
you selected.
2.
Use treble register [3] or [4] (PARAM LIST)
to select the following parameter:
AUd
Pressing registers [3] and [4] (PARAM LIST) simultaneously
will select the first parameter, "AUd".
3.
Use register [1] (√ VALUE) or [2]
(VALUE ®) to set the playback level.
sCa
The setting range is: OFF, 1~10. If you select "OFF",
the audio file will be inaudible.
4.
Press the [SET] register to leave the FR-3x's
PARAMETER mode.
NOTE
AUL
8