Playing Two Tones Layered (Dual Play) - Roland FP-7F Owner's Manual

Performing

Playing Two Tones Layered (Dual Play)

You can play two tones simultaneously from a single key. This is called "Dual Play. "
As an example, here's how to layer piano and strings tones.
1. Hold down the [PIANO] button and press the [STRINGS/PAD] button.
Both buttons will light.
When you play the keyboard, you'll hear the piano and strings tones layered.
When you press any TONE button, Dual Play will be cancelled, and only the sound of the button you pressed will be heard.
* You can't use Dual Play simultaneously with Split Play.
About the tones
Tone name
Tone 1
Tone 2
* For some combinations of tones, the effect will not be applied to tone 2, causing it to sound differently.
MEMO
• You can adjust the volume balance of the two tones (p. 72).
• You can shift the pitch of tone 2 in steps of an octave (p. 72).
• When you press the damper pedal while using Dual Play, the effect will be applied to both tone 1 and tone 2. If desired, you can have the
effect be applied to only one of the tones (p. 72).
26
Tone 1
Tone 2
Corresponding button How to select a tone
TONE button at the left Press the [-] or [+] button.
TONE button at the right Hold down the tone 2 button (the lit TONE button at the right) and press the [-] or [+] button.