Managing Target Device Tasks Using The Oscar Interface - Fujitsu series3-1621 User Giude

• If you enter a value of 5 to 120 seconds, the first user will be warned and will be
allowed to continue using the target device for up to the amount of time in the
Timeout Seconds field. The session will be preempted when the user clicks
OK, or when the specified time elapses.
Click OK to save the settings.
Figure 17: Preempt window
3.11 Managing target device tasks using the
OSCAR interface
From the commands window, you can manage the switching system and user
connections, enable Scan mode, and update the firmware.
Feature
KVM-IA Status
Display config
Run Diagnostics
Scan Enable
User Status
Display Versions
Device Reset
Table 6: Commands to manage routine tasks for the target device
590-591-609D

Managing target device tasks using the OSCAR interface

Purpose
View the version and upgrade status of the KVM-IA.
View current display settings.
Configure and begin diagnostics on target devices.
Begin scanning the target devices. Set up a target device list
for scanning in the Setup window.
View and disconnect users.
View version information for the KVM s3-1621 appliance as
well as view and upgrade firmware for individual KVM-IAs.
Re-establish operation of the keyboard and mouse.
31