3Com Oven Release Notes page 15

Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3
host=connect01.voicepulse.com
If it is not already included, add this line:
fromuser= <VoicePulse_login_ID>
(ID 48964)
•
If you use the 3Com Asterisk CLI to turn on debug logging or set a high verbosity level, the
performance of the 3Com Asterisk Appliance can be adversely affected.
•
Unless there is a valid reason, such as validating configuration changes or call flows, do not use the
3Com Asterisk CLI asterisk –r command during a HyperTerminal/ssh connection and leave it
running. The performance of the 3Com Asterisk Appliance can be adversely affected
•
If you observe that the Asterisk Appliance time setting does not synchronize correctly with an NTP
server:
Create (or modify, if it already exists) the /etc/config/rc.local file to include these lines:
a)
killall ntpd
ntpd -g &
From the 3Com AsteriskGUI, click the Networking tab and then delete the URL of the NTP
b)
server.
Enter the URL of the NTP server again in the NTP server dialog box.
c)
Note: To test DNS resolution, from the 3Com Asterisk CLI, you can use the ping command
with the domain name of the NTP server.
From the Home page, click Save Configuration and then click Reboot.
d)
Page 15