Physical Interface - TP-Link TL-PA6010 User Manual

Item
Power LED
Powerline LED
Ethernet LED
Note:
5 minutes after the device connected to the adapter is turned off, the adapter will automatically switch to
the power-saving Mode.

1.4 Physical Interface

There are four physical interfaces on this Powerline Adapter.
Power Plug
Interface
Ethernet Port
*
Power Plug
TL-PA6010
Status
On The adapter is on.
The adapter is in power-saving mode or in pairing
Blinking
procedure.
Off The adapter is off.
The adapter is connected to a powerline network.
On
Blinking
The adapter is transferring data.
The adapter isn't connected to any powerline network or
Off
is in power-saving mode.
The Ethernet port is connected, but there is no data
On
being transferred.
Blinking The Ethernet port is transferring data.
Off The Ethernet port isn't connected.
A 10/100/1000 Mbps Ethernet port for connecting the adapter to the
PC or the broadband device with a network cable.
A Power Plug for connecting the adapter to an AC power socket
(100–240V~, 50/60Hz).
4
AV600 Gigabit Powerline Adapter
Indication
Pair Button
Ethernet Port
Description