Physical Interface - TP-Link TL-PA2010 User Manual

Ethernet LED
Note:
5 minutes after the device connected to the adapter is turned off, and the adapter will automatically
switch to the power-saving Mode.

2.3 Physical Interface

There are three physical interfaces on this Powerline Adapter.
Power Plug
Interface
Ethernet Port
Power Plug*
Pair Button
*
The provided power plug may differ from the picture due to different regional power specifications.
Here we take the EU version of this product as an example.
The Ethernet port is connected, but there is no data
On
being transferred.
Blinking The Ethernet port is transferring data.
Off The Ethernet port isn't connected.
A 10/100Mbps Ethernet port for connecting the adapter to the PC or the
broadband device with a network cable.
A Power Plug for connecting the adapter to a 100V ~ 240V AC power
socket.
Pair buttons are used to secure a powerline network. To secure your
network, please follow the steps below. Firstly, plug in a new adapter,
and press its pair button for 1 second; then plug in another adapter and
press its pair button for 1 second as well. The two buttons should be
pressed within 2 minutes of each other. After that, wait about 60 seconds
so that the two adapters can finish connecting.
TL-PA2010 AV200 Nano Powerline Adapter
Description
5
Pair Button
Ethernet Port