Physical Interface; Integrated Electrical Socket; Ethernet Port - TP-Link TL-PA8010P User Manual

Item
Power LED
Powerline LED
Ethernet LED

Note:
Five minutes after the device connected to the powerline adapter is turned off, the powerline adapter will
automatically switch to Power-Saving Mode.

1.5 Physical Interface

There are four types of physical interfaces on this powerline adapter.

Integrated Electrical Socket

Ethernet Port

Interface
Ethernet Port
*
Power Plug
Pair Button
TL-PA8010P
Status
On/Off The powerline adapter is on or off.
Blinking every second: Pairing is in process.
Blinking
Blinking every 15 seconds: Power-Saving Mode is on.*
Yellow-green Powerline network is in good condition.
Powerline network is in poor condition. We recommend
Red
trying another wall socket.
The powerline adapter is not connected to any powerline
Off
network or is in Power-Saving Mode.
On/ Off The Ethernet port is connected or not connected.
A 10/100/1000 Mbps Ethernet port for connecting the adapter to the PC or the
broadband device with a network cable.
A power plug for connecting the adapter to an AC power socket (100–240V~,
50/60Hz).
Press and hold for 1 second to set up or join a secure powerline network.
Press and hold for about 8 seconds to leave an existing powerline network.
Press and hold for more than 15 seconds to reset the powerline adapter.
AV1200 Gigabit Passthrough Powerline Adapter
Indication
Description
3
Power Plug
Pair Button