Hearth and Home Technologies Aztec Owner's Manual page 34

OPTION D: Flush Wall Finish with Luxor Surround
Kiva-style fi nished in a straight wall (see Figure 11.8).
Figure 11.8 Flush wall installation with Luxor Surround
• Unit is installed using framing dimensions found in
Figure 3.2.
• Do not use nailing tabs provided on unit sides for
Option D.
• Nailing tabs found in manual bag assembly or in
cardboard sleeve of packing. Install nailing tabs using
screws on upper unit sides (see Figure 11.3).
• This places unit back 1/2 inch from framing studs such
that drywall or other material can be brought directly
across non-combustible board up to fi nishing strip.
WARNING
Fire Risk.
1/2 Inch non-combustible board installed on front
face of fi replace MUST remain in place if using
combustible fi nishing materials.
• A cardboard template is printed on unit shipping
carton and may be used to help cut drywall or other
fi nishing materials. Simply cut along line and use it as
a template. For Luxor Surround, cut an additional 3 in.
wider than the template.
34
3-in. GAP
SHEETROCK
EDGE
FINISHING STRIP
Hearth & Home Technologies • Bravo, Aztec • InD • 703-900 Rev. N • 8/06