Check The Print Quality; Set The Date And Time - Brother DCP-J140W Quick Start Manual

e
Take care to match the colour of the lever with
the cartridge colour.
Install each ink cartridge in the direction of the
arrow on the label.
f
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
7

Check the print quality

a
When the preparation process has finished, the
LCD shows this message
Set Paper and
Press Start
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press a (Yes) to
finish the quality check and go to step 8.
If you can see missing short lines, press b (No)
and follow the steps on the LCD.
8

Set the date and time

a
Press Menu.
b
Press a or b to choose 0.Initial Setup.
Press OK.
c
Press a or b to choose 1.Date&Time.
Press OK.
d
Press a or b to enter the last two digits of the
year, and then press OK.
e
Repeat for the Month and Day, and then Hours
and Minutes in 24-hour format.
f
Press Stop/Exit.
4
q