JVC WR-MG300 Instructions Manual page 13

Marine case
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
3. Check that there are no scratches or cracks
on the marine case every time you use it.
The marine case must withstand water
pressure with use. Repeated exposure to
pressure eventually leads to material fatigue,
which may result in damage of the marine
case. Every time you use the marine case,
check in advance that there are no scratches
or cracks. If you frequently use the marine
case, be sure to ask for maintenance at the
store of purchase. (There is a charge for
maintenance.)
To protect your camera and ensure optimum use,
keep the examples listed above in mind when
using the marine case.
JVC accepts no responsibility for water leakage or
damage to anything inside the marine case
(camera, SD card, etc.) due to careless usage of
this product. Be sure to follow correct procedures
when using the marine case.
Notes
Limitations in use with GZ-HM30/50/430/435.
1) These models neither have Power button
nor Digital still camera function.
2) To prevent the Camcorder from switching
off automatically, it is recommended to set
"Auto power off" mode to "off" from the
Camcorder setting menu.
3) With above procedure, the Camcorder
would always be on in the marine case.
Please prepare battery to meet your
operation time while the Camcorder is in
the marine case. (Larger capacity battery
is recommended)
Accessories
• Anti-fog liquid
• Silicone grease (5 g) x 1
• Silicone cloth
• Drying agent (2 g) x 5
• Strap
• 2 O-rings
One spare O-ring.
• Base
To attach to the camera.
• Grip
Commercially available
lights and weights can also
be attached.
When there is a need for
buoyancy adjustment,
attach commercially
available weights to the
grip.
• Pick
• Screw tightening key
• 2 hexagonal wrenches
Large: for screwing the grip
Small: buckle opener
• Power button cap
Maintenance Kit - Sold Separately
(Part Number: MG270_MTKIT)
MG300_MTKIT)
You can purchase the following set of expendable
parts.
Please contact your local JVC service
representative.
• O-rings x 2
• Silicone grease (5 g) x 1
• Drying agent (2 g) x 5
• Lens tissue paper (50 sheets) x 1
• Power button cap x 2
O-ring
13

Advertisement

Table of Contents
loading

Table of Contents