To Clean The Generator; When Calling The Factory; Storage - Briggs & Stratton 7000 Rated Watts Home Standby Generator Installation, Start-Up And Owner's Manual

Briggs & Stratton Generac Generator Discount Parts Call 606-678-9623 or 606-561-4983

To Clean the Generator

• Use a damp cloth to wipe exterior surfaces clean.
Improper treatment of generator can damage it and
shorten its life.
• DO NOT expose generator to excessive moisture, dust, dirt,
or corrosive vapors.
• DO NOT insert any objects through cooling slots.
• Use a soft, bristle brush to loosen caked on dirt, oil, etc.
• Use a vacuum cleaner to pick up loose dirt and debris.
• Use low pressure air (not to exceed 25 psi) to blow
away dirt. Inspect cooling air slots and openings on the
generator.These openings must be kept clean and
unobstructed.
Briggs & Stratton Power Products Home Standby Generator
Installation, Start-Up and Owner's Manual
CAUTION
www.mymowerparts.com

When Calling the Factory

You must have the following information at hand if it is
necessary to contact a local service center regarding
service or repair of this unit:
1. Obtain unit Model Number and Serial Number from
unit data decal. See "Know Your Home Standby
Generator" diagram for location.
2. Obtain engine Model/Type/Code numbers from engine
label. See "Know Your Home Standby Generator"
diagram for location. Please note that model number
may vary slightly from that presented herein.

STORAGE

The Briggs & Stratton Home Standby Generator is designed
for continuous backup operational duty.As such, there is no
need to take any storage precautions. However, if it
becomes necessary to take the system out of service for an
extended period, call Briggs & Stratton Technical Services at
1-800-743-4115, between 8:00 AM and 5:00 PM CT for
specific recommendations.
21