JVC GY-DV700W Instructions Manual page 14

2. CONTROLS, INDICATORS AND CONNECTORS
2-9 Indications in Viewfinder (Cont'd)
1
ACCU - FOCUS
2
G
3
F
4
I 5 7
SD
6
B
CH1 - - - - + - -
F 5 . 6 CH2 - - - - + - -
STBY
7 9
B
Status 0
● Status 0
Display Position Display
1
ACCU-FOCUS Blinks during the ACCU-FOCUS operation.
SKIN AREA Blinks while the skin tone detail color area is displayed.
S Displayed when the SHUTTER or V-SCAN is ON.
FAS Displayed when the Full Auto Shooting is ON.
ALC Displayed when the ALC alone is ON.
2
G Displayed in other modes than 0 dB, LOLUX and ALC.
L Displayed during LOLUX operation.
3
F Displayed when FAW alone is ON.
4
I Displayed when IRIS BACK LIGHT or IRIS SPOT LIGHT is selected.
5
SD Displayed while the Skin Detail function is in operation.
6
Displayed when BLACK STRETCH or BLACK COMPRESSION is selected.
B
7
Event display See the table below.
7 Event display
Event is displayed in the viewfinder for only about 2 seconds when any of the following switches is operated.
Switch
ZEBRA ZEBRA ON, OFF
BLACK BLACK STRETCH, NORMAL, COMPRESS
GAIN GAIN –3 dB, 0 dB, 6 dB, 9 dB, 12 dB, 18 dB, ALC
WHT. BAL WHITE BAL A, B, PRESET, FAW
FULL AUTO FULL AUTO ON, OFF
AUTO IRIS IRIS BACK L, NORMAL, SPOT L, BACK L, SPOT L
LOLUX LOLUX ON, OFF
FILTER knob 3.2K, 5.6K+1/8ND, 5.6K, 5.6K+1/64ND
FILTER
VTR VTR STBY, SAVE
AUTO KNEE AUTO KNEE ON, OFF
E-26
1
ACCU - FOCUS SCENE F I L E A
2 WH I TE BA L A
G F I L TER 3 . 2 K
SHUT TER 1 / 1 0 0 0
3
F GA I N 6 d B
4
I R I S L EVE L NORMA L
I 5 I R I S DETECT NORMA L
SD FUL L AUTO OF F
6
B REC T I ME < 6 0
C
M 0 9 9
< 6 0 1 . 2 4V
0 8 A
Status 1 Status 2
Function
Event Display Contents
2. CONTROLS, INDICATORS AND CONNECTORS
2-9 Indications in Viewfinder (Cont'd)
● Status 1
In addition to the information on the Status 0 screen, this screen displays audio indicators and information on remaining tape,
voltage and lens F-number.
Display position Display
8 Shows the input level of the audio input channel.
(Example)
CH1- - - - + - - Display ON/OFF can be selected using the VF DISPLAY menu screen.
See "AUDIO DISPLAY" on page 72.
CH2- - - - + - -
9
STBY VCR in standby mode
SAVE VCR in save mode
STOP VCR in stop mode
REC VCR in record mode
FF VCR in fast-forward mode
REW VCR in rewind mode
EJECT VCR in reverse search mode
0 Remaining tape indication (displayed in 1-minute steps)
(Example)
< 60
When the tape is used for a long time, the remaining tape may not be
(Example)
indicated accurately. At the beginning of the tape, in particular, the indication
12: 34: 56: 20
may show smaller value than the actual one.
Time code display
Time code display is available when the "REC TIME" item on the VF DISPLAY
menu screen is set to TIME CODE.
See "REC TIME" on page 72.
A Voltage indication (displayed in 0.1 V steps)
(Example)
12.4V
Shows the F-number of the connected lens.
B
OPEN, F2, F2.8, F4,
It is not displayed when the lens is removed. For some lenses, no display
F5.6, F8, F11, F16,
appears.
CLOSE
Display ON/OFF can be selected on the VF DISPLAY menu screen.
See "F NO.DISPLAY" on page 72.
C In the Super Scene Finder (S.S.F.) mode, the number of memorized scenes
(Example)
is shown.
M: 099
M : In MARK mode
C : In CUE mode
Number: Number of memorized scenes
● Status 2
This screen displays the camera setup statuses.
Event display is not available while this screen is displayed.
Indication
SCENE FILE A, B, OFF
WHITE BAL A, B, PRESET, FAW
FILTER 3.2K, 5.6K+1/8ND, 5.6K, 5.6K+1/64ND
SHUTTER OFF, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/50.1 to 1/2053.6 (in VARIABLE mode),
EEI (in ALC mode)
GAIN -3dB, 0dB, 6dB, 9dB, 12dB, 18dB, LOLUX, ALC
IRIS LEVEL NORMAL, BACK L, SPOT L
FULL AUTO ON, OFF
REC TIME Remaining tape time or time code.
Function
Note:
When the RS-232C cable
is connected, the VCR
operation mode may not
be displayed correctly.
Indication Contents
E-27