Using The Headset For Calls - Bose Bluetooth headset Owner's Manual

English Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16

Using the headset for calls

You can respond to an incoming call or initiate a call with
one press of the Call button.
You may notice a brief tone when the headset reacts to each
new action.
Basic call actions:
Answer an incoming call by pressing the Call button.
Make a call by either:
• Pressing the Call button and using voice commands to select
and dial the mobile phone number (if your mobile phone
responds to voice commands).
• Or, using your phone directly to choose and dial the number
you want.
Then you can complete the call without using your phone again.
End a call by pressing the Call button.
Adjust the volume by pressing the Volume + or – button during a
call. Or change the volume on your phone
Mute a call by pressing the Volume + and – buttons at the same
time. Press the two buttons again to unmute the call. A reminder
tone sounds every 30 seconds while the headset is on mute.
Transfer the audio to your mobile phone by pressing and
holding the Call button (during a single phone call, only).
Redial a call by pressing the Call button two times.
Tab 5, 11
.
Tab 6, 12
11