Assembly - Healthrider C515e HREL3006.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included hex keys, assembly requires a phillips screwdriver
wrench , and a rubber mallet
Use the drawings below to identify the small parts used in assembly. The number in parentheses below each
drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the
quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the
parts bag, check to see if it has been pre-assembled.
M8 Split
Washer (58)–4
M4 x 22mm
M4 x 16mm
Screw (66)–4 Screw (93)–2
M8 x 25mm Patch
Screw (22)–4
M8 x 50mm Button
Bolt (82)–4
Wave Washer
M10 Split
Washer (70)–2
M8 Nylon
Locknut (46)–8
M8 x 45mm Button
Bolt (50)–4
M10 x 112mm Carriage Bolt (34)–4
M10 x 52mm Bolt Set (27)–2
.
Large Wave
(95)–2 Washer (20)–2
M10 Nylon
Locknut (29)–4
M8 x 65mm Button
M10 x 88mm Button Screw (63)–2
5
, an adjustable
M8.5 Washer
(53)–12
Frame Spacer (83)–2
Bolt (89)–4