Figure 2-1: Communications > Host/Loop > Host/Loop Communications Tab - Honeywell NetAXS-123 User Manual

The Host/Loop Communications tab enables you to:
• Select and configure the communication mode you will use to connect to the
• Configure the following host settings:
• Configure the loop:
Click
Communications > Host/Loop > Host/Loop Communications Tab
Host/Loop Communications Tab.
Figure 2-1: Communications > Host/Loop > Host/Loop Communications Tab
NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
panel.
– Connection Type (host or web server)
– Comms Type
– Port Number
– Host IP Address
– Time Sync (Enable—how often in minutes the gateway will broadcast its
time to downstream panels)
– Baud Rate (for communication among downstream panels)
Configuring via the Web Server
Configuring the System
to display the
19