Honeywell DTC 100/2 User Manual Instructions For Installation And Maintenance page 10

DTC 100/2
Basic coupling with a pump controlled by the electri-
cally actuated motor ball valve EMV 110 series 800.
It is used in cases which require temperature regulation of sanitary water in the classical
oil or solid fuel powered boiler. When the conditions which require heating of the DHWS
(Domestic Hot Water Storage) have been met, the valve EMV 110 series 800 opens , but
the pump is put into operation only when the valve is open.
Electrical connection
10
DTC
Differential thermostat
DTC 100/2
T1,T2
Sensors
T1 - sensor located in the collector
T2 - sensor located in the DHWS
P
P - circulation pump
EMV
Electric motor actuated ball
valve:
EMV 110.. series 800
EMV 110.. series 801
MV 110..compact