Figure 76 Front panel board cable routing
Description
Front panel board power cable
Front panel board USB cable
CAUTION: Route the front panel board cables neatly. If necessary, secure them using the pre-installed cable
clips located on the chassis base. The cables should be routed in a position where they will not be pinched or
crimped by the top cover, nor should they hamper proper airflow inside the chassis.
Status LED indicators
This section describes the internal and external status LED indicators located on the front panel, rear panel, and
system board. These LED indicators aid in problem diagnosis by indicating the status of system components and
operations of the server.
Front panel LED indicators
The status LED indicators on the front panel allow constant monitoring of basic system functions while the server is
operating. These LEDs are mounted on the front panel board. Figure 77 shows and describes the function of
these LEDs.
Connections
J11 on the system board
Power connector on the front panel board
J13 on the system board
USB connector on the front panel board
Connectors, buttons, and LEDs 67