Jenn-Air JJW8527 User Manual page 11

O L
VEN IGHT
Before replacing light bulb, DISCONNECT
POWER TO OVEN. Be sure bulb is cool. Do
not touch a hot bulb with a damp cloth as the
bulb may break.
TO REPLACE OVEN LIGHT:
Use a dry potholder and very carefully un-
screw bulb cover and bulb. Replace with a 40
watt, oven-rated appliance bulb. Bulb with a
B
Y
EFORE
F ,
OR MOST CONCERNS TRY THESE FIRST
• Check if oven controls are properly set.
• Check if oven is properly connected to electri-
cal outlet.
• Check or re-set circuit breaker. Check or
replace fuse.
• Check power supply.
I ,
F CLOCK INDICATOR WORDS
LIGHTS OPERATE BUT OVEN DOES NOT
:
HEAT
• Clock controls may be set for a delayed bake
function.
• The Oven Control Lockout may have been set.
(See page 4.)
I
F THE OVEN LIGHT AND
:
DOES NOT FUNCTION
• The light bulb is loose or defective.
• The oven light does not work during self-
cleaning process.
T
HERE IS A STRONG ODOR OR LIGHT
SMOKE WHEN OVEN IS TURNED ON
• This is normal for a new wall oven and will
disappear after a few uses. Initiating a clean cycle
will "burn off" the smells more quickly. Turning
on a ventilation fan will help remove the smoke
and/or odor.
• Excessive food soils on the oven bottom. Use
a self-clean cycle.
I
F OVEN WILL NOT ACTIVATE THE SELF
:
CLEANING PROCESS
• Check the "Clean" and "Stop" time settings and
the current time of day on the clock.
I
F OVEN DID NOT CLEAN PROPERLY
• Oven may need longer cleaning time.
brass base is recommended to prevent fusing
of bulb into socket.
Replace bulb cover and reconnect power to
oven. Reset clock.
O
VEN
TO PROTECT THE OVEN DOOR
WINDOW:
1. Do not use abrasive cleaning agents such
C
OU ALL FOR
:
• Excessive spills were not removed prior to self-
cleaning process.
I
F FOODS DO NOT BROIL PROPERLY
• Check rack position. (See page 5.)
• Voltage into house may be low.
I
F BAKED FOOD IS BURNED OR TOO
BROWN ON TOP
, /
AND OR
• Food may be positioned incorrectly in oven.
(See "Cooking Made Simple" booklet.)
• Oven not preheated properly.
I
F FOODS BAKE UNEVENLY
• The oven may be installed improperly.
• Check the oven rack with a level.
/ • Stagger pans, do not allow pans to touch each
OR CLOCK
other or oven wall.
• Check instructions for suggested placement of
pans on oven rack. (See "Cooking Made
Simple" booklet.)
I
F OVEN DOOR WILL NOT UNLOCK
: • Oven may not have cooled to safe temperature
after self-cleaning process.
I
F OVEN BAKING RESULTS ARE LESS
THAN EXPECTED
• The pans being used may not be of the size or
material recommended for best results. (See
"Cooking Made Simple" booklet).
• There may not be sufficient room around sides
-
of the pans for proper air circulation in the
oven.
• Check instructions for preheating, rack posi-
tion and oven temperature.
I
: F BAKING RESULTS DIFFER FROM
PREVIOUS OVEN
W
INDOW
S
ERVICE
:
:
:
:
:
10
as steel wool scouring pads or powdered
cleansers as they may scratch the glass.
2. Do not hit the glass with pots, pans,
furniture, toys, or other objects.
3. Do not close the oven door until the oven
racks are in place.
Scratching, hitting, jarring or stressing the
glass may weaken its structure causing an
increased risk of breakage at a later date.
• Oven thermostat calibration may differ be-
tween old and new ovens. Follow recipe and use
the directions in this guide before calling for
service since the calibration on the previous
oven may have drifted to a too high or too low
setting. (See p. 4 - Adjusting Oven Tempera-
:
ture.)
I
F THE COOLING FAN CONTINUES TO
OPERATE AFTER THE OVEN HAS BEEN
:
TURNED OFF
• This is normal. The fan will automatically shut off
when the oven is cooled.
I
F A FAN IS HEARD WHILE USING THE
BROIL AND CLEAN MODES
• This is the cooling fan and is normal. The fan will
continue to run after use until the oven cools.
F C
AULT ODES
• Fault codes are shown in the display as "F" and
a number. If a fault code appears in the display
and beeps sound, press the Cancel pad. If the
fault code and beeps continue after pressing
Cancel, disconnect power to the oven. Wait a
few minutes, then reconnect power to the oven.
If the fault code and beeps still continue, discon-
nect power to the wall oven and call an autho-
rized servicer.
• If the oven is heavily soiled, excessive flare-ups
may result in a fault code during a clean cycle.
Press Cancel pad and allow the oven to cool for
one hour, then reset the clean cycle. If the fault
code and beeps still continue, disconnect power
to the appliance and call an authorized servicer.
• If an error beep sounds (two short beeps) with
no fault code in the display, clean any spill from
key pad area within 30 seconds. If, after 30
seconds the spill is not removed or another
problem exists, an F7 fault code will be dis-
played. Disconnect power to the appliance and
call an authorized servicer.
: