Viewing A Scan List - Motorola ASTRO Digital XTS 3000 User Manual

• Deleting Nuisance Channels
When the radio scans to a channel that you do not
wish to hear (nuisance channel), you can
temporarily delete the channel from the scan list.
1. When the radio is locked onto the channel to be
deleted, press the Nuisance-Delete Button (if
programmed, see page 2). Repeat this step to delete
additional nuisance channels.
Priority channels and the selected channel
Notes
cannot be deleted using the nuisance-delete
feature.
2. The radio continues scanning the remaining channels in the list. To
resume scanning the deleted channel, you can change channels or leave
and re-enter scan operation.
• Dynamic Priority Change (Conventional Operation Only)
While the radio is scanning, the dynamic priority change feature lets you
temporarily change any channel in a scan list (except the priority-one
channel) to the priority-two channel. The present priority-two channel
becomes a non-priority channel. This change remains in effect until scan
is turned off, then scanning reverts back to the preprogrammed state.
1. When the radio is locked onto the channel to be designated as priority-
two, press the Dynamic Priority Button (if programmed, see page 2).
Notes The priority-one channel cannot be changed to priority-two.
2. The radio continues scanning the remaining channels in the list. To
resume scanning the preprogrammed priority-two channel, you must
leave and re-enter scan operation.

• Viewing a Scan List

The "view scan list" feature allows you to view the members of the scan
list associated with the currently selected channel. You view a scan list the
same way you view other lists (see "Viewing a List" on page 17).
Common Radio Features
47