Table of Contents
Advertisement
Create an 802.1Q VLAN
Create an 802.1Q VLAN and add tagged /untagged member ports to it.
1.
Select <Edit>.
2.
VLAN Name: Type in a name for the new VLAN.
3.
VLAN ID: Type
256 VLAN groups.
4.
Protocol VLAN: Press Spacebar to choose protocol types.
5.
Member: Press Spacebar to choose VLAN members. There are three options:
a. UnT
agged: the port is a member of this VL
NO
T VLAN-tagged frames.
b. Tagged: the port is a member of this
VLAN-tagged frames.
c. NO: The port is NOT a member of this VLAN group.
6.
Press Ctrl + A to go back to the action menu.
7.
Select <Save> to save all configured values.
in a VID between 1-4094. The default is 1. You can configure up to
AN group and outgoing frames are
VLAN group and outgoing frames are
72
Advertisement
Table of Contents
