Hawking HGMS224 User Manual page 41

Basic
Create a VLAN and add tagged member ports to it.
1. Click on the "Basic" tab, and then click Add to reach the page shown below.
2. Type a name for the new VLAN.
3. Type a VID (between 2-4094). The default is 1.
4. Choose the protocol type.
5. From the column box on the left that displays the available ports, select the ports you
would like to add click Add >>. If the trunk groups already exist, you can view them here
(ex: TRK1, TRK2...) and configure them as the members of a VLAN.
41