4- Way Conference Call 2; Intercom; Intercom Calls; One-Touch Intercom - RCA 25250 User Manual

Intercom Calls

4-way conference call (Line 1 + Line 2 + 2 extension):
1. Once the base unit or handset has both Line 1 and 2 on hold, press the
Intercom button and then select the desired handset or base to

intercom.

2. The selected handset or base will emit a page tone. The user can press
the Talk button on the handset or the Speaker button on the base to
answer the intercom call page.
3. The originating caller can then press the CONF soft key shown on the
display to initiate a conference. Since Line 1 and 2 are both on hold,
the user will be prompted to select Line 1, Line 2 or Both to conference
with. The user can then use the soft keys to select the desired
option. If the BOTH soft key is selected a 4-way conference is
established between the originating caller, both lines and the intercom
call.
Intercom Calls

One-Touch Intercom

1. On the base, in idle mode, press any One-Touch Intercom button (1-10)
for the station you want to intercom with. One-Touch button #1
represents handset 01, #2 represents handset 02, etc.
The Intercom paging ring will be emitted.
You may press the Intercom button, then press the Intercom/Memory
button (1-10) for the stations you want to intercom with.
Press the Intercom button, and all the registered handsets and the base
except itself list in the log, use the VOL (- or +) key to scroll to the
station you want to intercom with, and then press SELECT soft key to
confirm.
NOTE: To abort intercom call, press the STOP soft key.
NOTE: If the receiving station does not answer within 30 seconds, the
intercom call is cancelled. You will hear an error tone and "Unavailable"
shows in the display.

Answering an Intercom Call

When you receive an Intercom call, the display shows the Caller's Name and
Phone ID.
If you want to answer with the speakerphone, press the Speaker button. If
you want to answer by headset, press the Headset button on the base or
the Talk button on the handset. The headset must be already connected.
If you do not want to answer this intercom call, press the REJECT soft key.
0
-OR-
-OR-