A Nswering S Ystem; Ff S Tatus; Oga Playback - RCA 25250 User Manual

Programming the Telephone
Answering System (only applicable for base)
1. Make sure your phone is OFF (not in Talk mode).
2. Press the MENU soft key on BS to go to the main menu.
3. Press VOL (- or +) button to scroll to "Answer Sys.".
4. Press SELECT soft key to confirm. You may program the following items
in base: On/Off Status, OGA Playback, OGA Record, Set OGA, Set
Office Time, Ring Delay, Message Length, Call Screening, Message Alert,
Remote Password.
On/Off Status
This is used to set the answering system On or Off for each telephone line
individually.
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the On/Off Status.
2. Press SELECT soft key.
3. Use the VOL (- or +) button to select On or Off and use the DIR or CID
button to toggle between L1 and L2.
4. Press the SELECT soft key to save your selection and the status shows in
the display.

OGA Playback

From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the OGA Playback.
2. Press SELECT soft key.
3. Use left and right button to toggle between Line 1 and Line 2 and use
VOL (- or +) button to scroll to your selection.
4. Press SELECT soft key to play the selected OGA, if the selected OGA is
empty, "EMPTY" shows in the display.
OGA Record
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the OGA Record.
2. Press SELECT soft key.
3. Use left and right button to toggle between Line 1 and Line 2 and use
VOL (- or +) button to scroll to the selection you want to record.
4. Press the SELECT soft key and begin recording.
5. Press the FINISH soft key to end the recording.
6. After recorded, the unit will automatically play the OGA once.
20