Acer P243W Service Manual page 27

ACER P243W
26
Go to cover page
5.7 Checking the interface circuit of sync signal
5.7.1 Checking the control circuit of horizontal sync pulse
5.7.2 Checking the control circuit of vertical sync pulse
Proceed to "5.8 Checking the resolution
Check the horizontal
sync signal on I314 pin46
TTL level
OK
Proceed to "5.8 Checking the
resolution change IC movement"
section
Check the vertical sync
signal on I314 pin47 TTL level
OK
change IC movement" section
5. Troubleshooting (continued)
1. Video cable is defected.
2. Printed wire is broken between P304 pin13 and I314 pin46.
NG 3. FB305, R364, R363 is open.
4. R371, C336, D305 is short.
5. I311 is defected.
1. Video cable is defected.
2. Printed wire is broken between P314 pin14 and I314 pin47.
3. FB306, R368, R369 is open or more than one component.
NG
4. R370, C335, D303 is short.
5. I311 is defected.
Failure Point
Failure Point