American Standard Enfield 2373.401 Installation Instructions

ENFIELD
BIDET FITTING
and VACUUM BREAKER
with
EverClean™ Finish
Congratulations on purchasing your American Standard faucet
with EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful
for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
Required Tools
Flat Blade Screwdriver
Phillips Screwdriver
Roughing-in Dimensions
BIDET OUTLINE
IS SYMBOLIC
DOUCHE
SPRAY
ADJ. 1-1/4
3-7/8
(C)
1-3/16
DIA.
1-1/4
MAX.
FINISHED
FLOOR
Installation
Instructions
2373.401
2373.421
*Wrench
*Supplied with Fitting
FINISHED
WALL
TRANSFER VALVE
(FOR FLUSHING
RIM OR SPRAY)
7/8 DIA.
2-1/8
DIA.
TO 2-1/4
1-3/8
DIA.
5-1/2
1-1/4 O.D. TAILPIECE
DIVERTER AND
VACUUM BREAKER
8 TO 12
ASSEMBLY
(H)
2-1/4
DIA.
4-1/4
FOR GROUND JOINT
CONNECTION OR 1/2"
O.D. SLIP (INLETS)
REAR VIEW WITH
WALL REMOVED
Adjustable Wrench
MOUNTING BIDET FAUCET
CAUTION
Place MOUNTING NUTS (1) onto the VALVE BODIES
(2) and insert VALVE BODIES (2) through outside
holes, from underside of the BIDET LEDGE. Drop the
RUBBER RING (3) over the VALVE BODIES (2) and
thread DECK ADAPTER (4) onto VALVE BODIE (2)
until it locks against the internal stop.
Tighten the MOUNTING NUT (1) to secure the
VALVE BODIES (2).
Remove MOUNTING NUT (9), FRICTION RING (10)
and UPPER GASKET (7) from TRANSFER VALVE (8)
and insert TRANSFER VALVE (8) into the center
forward hole of BIDET.
Replace UPPER GASKET (7) and FRICTION RING (10).
Position the side threaded outlet rearward and secure
MOUNTING NUT (9). Thread ESCUTCHEON (5) onto
TRANSFER VALVE (8) until it seats against the
BIDET LEDGE.
4
3
BIDET
LEDGE
1
Certified to comply with ASME A112.18.1M
U.S. Patent No. 5,819,789
Channel Locks
Turn off hot and cold water
supplies before beginning.
9
5
10
COLD
HOT
7
8
2