HP Pro 3000 Quickspecs page 12

QuickSpecs
System Details
System Heat Dissipation
with Energy Efficient*
Power Supply
Power Supply Fan
FEMP Standby Power
Compliant
(<2W in S5 - Power Off)*
Power Consumption in ES
Mode - Suspend to RAM
(S3) (Instantly Available
PC)
High voltage immunity
China Telecom YD/T 993-
2006 spec
System Environmental
Specs
BTU/hr.(For 115V/60Hz)
48.2 W or 164.4584
BTU/hr. (For 30V/50Hz)
300W:
50.4W or 171.9648
BTU/hr. (For115V/60Hz)
50.3W or 171.6236
BTU/hr.(For 230V/50Hz)
N/A
80mm variable speed
250W:
0.45W (For 115V/60Hz)
0.53W (For 230V/50Hz)
300W:
0.65W (For 115V/60Hz)
0.71W (For 230V/50Hz)
<3W
up to 410V/s
Yes
Values are subject to change without notification and are for reference only.
Performance of system, options, and ancillary equipment will vary depending on the system
configuration.
Levels presented do not account for non-HP/Compaq installed hardware.
Ambient Air Temperature Operating
Humidity
DA - 13483 North America — Version 8 — March 7, 2011
52W or 177.424
BTU/hr.(For 230V/50Hz) BTU/hr. (For 230V/50Hz)
N/A
80mm variable speed
0.61W (For 115V/60Hz)
0.69W (For 230V/50Hz)
<3W
N/A
N/A
Storage
Operating
HP Pro 3000 Business PC
51.4W or 175.3768
BTU/hr. (For 230V/50Hz)
N/A
80mm variable speed
0.26W (For 115V/60Hz) 0.42W (For 115V/60Hz)
0.30W (For 230V/50Hz) 0.47W (For 230V/50Hz)
<1W
up to 410V/s
Yes
MT: Operating 41° to 95°F (5 to 35°C) (Test 0 to
104°F (40°C));
SFF: 50° to 95°F (10° to 35°C) at sea level with an
altitude de-rating of 1.0°C per every 1000 ft (300
m) above sea level to a maximum of 10000 ft
(3048 m), no direct sustained sunlight. Maximum
rate of change is 50°F/Hr (10°C/Hr). The upper
limit may be limited by the type and number of
options installed.
MT: Storage: 90% RH @ 60°C for 12 hours (Non-
condensing)
SFF: -22° to 140°F (-30° to 60°C).
MT: 10% to 90% relative humidity (Rh), 35°C non-
condensing
SFF: 10% to 90% relative humidity (Rh), 35°C
maximum wet bulb temperature, non-condensing
53.3W or 181.8596
N/A
80mm variable speed
<3W
N/A
N/A
Page 12