Table of Contents
Advertisement
Table A-5: Is the iLO Remote Console Displaying Error Information?
Answer
No
Yes
Power Converter Module LED
The power converter module LED (CR25) can be located through the rear of the
server blade when the server blade is laying on a flat surface and receiving power
from a diagnostic station.
WARNING: To reduce the risk of shock or injury from high-current electrical
energy, do not remove the server blade access panel while the server blade is
connected to the diagnostic station.
Powering the server blade with the access cover removed is a service
operation and must only be performed by trained service personnel.
HP ProLiant BL20p Generation 3 Server Blade User Guide
Solution
An iLO problem exists. Refer to the HP Integrated Lights-Out User Guide that
ships with the server blade.
Error and event logs are available for diagnosis. Determine the next action by
observing POST progress and error messages. Use the iLO system status
page or use the local I/O cable connectors to help determine the problem. Refer
to the HP ProLiant Servers Troubleshooting Guide for a complete description of
POST error messages.
Server Blade Troubleshooting
A-11
Advertisement
Table of Contents
