3. Setting Up GoFlex Home – Mac
Step 2: Connecting GoFlex Home
For instructions, see "Step 2: Connecting GoFlex Home" on page 13.
Step 3: Setting Up GoFlex Home
TIP:
Before you begin, make sure you have a pen and paper handy to keep track of the
names and passwords you need to create during setup.
1.
Power on your computer, then insert the GoFlex Home Installation CD.
Note:
If you are setting up GoFlex Home on a computer or device without a CD-ROM drive, go to
www.seagate.com/goflexhomesupport to download the installation software.
Note:
If you would like to activate the GoFlex Home without installing the included software, open a
browser, type in goflexhome.local in the Address field, and press Enter to start the setup
process. Make sure the GoFlex Home is connected to your network before proceeding.
2.
Double-click the GoFlex Home install CD icon that appears on your desktop.
The Welcome screen opens.
Figure 14:
Welcome Screen
3.
Double-click GoFlex Home Setup to begin the installation.
FreeAgent® GoFlex™ Home User Guide (Version 2)
Step 2: Connecting GoFlex Home
24