Decoding The Goflex Home Lights; Finding More Help - Seagate FreeAgent GoFlex User Manual

8. Solving Problems

Decoding the GoFlex Home Lights

The lights on the front of the GoFlex Home dock change color and flash to indicate the status
of the drive and device. This section explains the meaning of the lights and what to do if a
problem occurs.
Table 1: GoFlex Home Light (top)
State
Green blinking
Green steady
Amber blinking
If the GoFlex Home light indicates a problem:
• Ensure that the drive is properly and fully connected to the dock.
• Ensure that your home network isn't down or disabled. (Look at the lights on the back of
the GoFlex Home dock—if they're not on and blinking, GoFlex Home is not connected to
your network.)
• Ensure that the Ethernet cable connecting GoFlex Home to your router isn't damaged.
• Ensure that your Internet connection isn't down or disabled. (Open a browser on your
computer to check.)
Table 2: Drive Light (bottom)
State
White steady
Off
If the Drive light indicates a problem:
• Ensure that the drive is properly and fully connected to the dock.
• Ensure that neither the dock nor the drive is damaged.

Finding More Help

The GoFlex Home network storage system is easy to use, but you may still have questions.
Go to www.seagate.com/goflexhomesupport if you have any problems setting up or using
your GoFlex Home network storage system.
FreeAgent® GoFlex™ Home User Guide (Version 2)
Status
Starting up
Connected to the network and ready for use
Not connected to the network
Status
Drive installed and ready for use
Drive not properly installed or experiencing a problem
Decoding the GoFlex Home Lights
88