Quick Start - iHome iDN45 Quick Start Manual

quick start

1: Power
RESET
RESET
TEST
TEST
Attach AC adaptor cable to DC jack on back of the unit
and plug the other end into a wall socket. Remove pull tab
from the backup battery compartment on the bottom of the
unit. Extend FM antenna for best reception.
3: Setting Clock with AutoSync
Dock your iPad, iPhone or iPod (see step 2). The unit will
attempt to autosync to the time on your iPad, iPhone or
iPod. The time on the display will update. This process
takes about 3 seconds.
DC 12V, 2.7A iPod/iPhone line-in
2
2: docking your
iPad/iPhone/iPod
in the 30-pin
connector
Gently dock your iPad, iPhone or iPod onto the 30-pin dock
on top of the unit. The iPad, iPhone or iPod will charge
while docked. Press the Dock
play your iPad, iPhone or iPod. The 30-pin connector is
not compatible with iPhone 5 and new iPad models.
4: Radio
Press and release the Mode Button as needed to select
FM band. Press and release the + or – Button to tune in
a station. See page 5 for programming presets.
Button on the unit to