Quick Start - iHome iHL64 Manual

quick start

1: power
Power the iHL64 by plugging the
power plug into a wall socket.
4: insert
Insert an iPod into the dock with
proper insert (iPod must not be in a
skin or case). The iPod will charge
while docked.
2: light
Press switch on lamp socket to
turn the light on and off. Maximum
wattage for the light bulb is 60W.
iPod nano
Insert
iPod nano
2nd generation
5: non-docking
For all non-docking iPod models,
including the iPod shuffle as well as
other audio devices, use the 3.5mm
line-in patch cord. (All non-docking
models will not charge.)
3
3: dock
Select the dock insert for your iPod
model from the table below and place
insert in dock.
Never dock an iPod without an
insert in place.
iPod video (30GB)
iPod mini (4GB/6GB)
Insert
Insert
iPod 5th generation-video (30GB) iPod mini (4GB,6GB)
6: play
Turn the switch to the left to turn
speaker on. To increase the volume,
turn further to the left. Turn the
switch to the very right to turn the
speaker off.