Table of Contents

Advertisement

Quick Start

1: Power
RESET
TEST
Attach AC adaptor cable to DC jack on back of
the unit and plug the other end into a wall socket.
Remove pull tab from the backup battery
compartment on the bottom of the unit. Extend
FM antenna for best reception.
3: Setting Clock with AutoSync
Dock your Lightning-compatible iPhone or iPod in the Dock
OR connect iPhone to USB port (see step 2). The unit will
attempt to autosync to the time on your iPhone or iPod. This
process takes about 3 seconds.
While the dock accommodates most cases, you may need to
remove your case for proper docking. Gently dock any iPad,
iPhone or iPod with Lightning connector onto the Lightning dock
on top of the unit. The device will charge while docked. Press
the
Dock Button on the unit to play your iPad/iPhone/iPod.
Connect an iPad, iPhone or iPod to the USB Port on the back
of unit using the connecting cable that came with it to charge
and play (press the
USB Button).
4: Radio
mode
Press and release the Mode Button as needed to
select FM band. Press and release the + or – Button
to tune in a station. See page 5 for programming
presets.
2
2: docking your
iPad/iPhone/iPod
in the Lightning dock
OR USB Port

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents