Cisco Small Business RV320 Quick Start Manual page 3

RV325
Insecure mounting might damage the router or cause injury.
W
ARNING
Cisco is not responsible for damages incurred by insecure wall-
mounting.
For safety, ensure that the heat dissipation holes are facing
W
ARNING
sideways.
Drill two pilot holes, approximately 109 mm apart, into the surface.
S 1
TEP
Insert a screw into each hole, leaving a gap between the surface
S 2
TEP
and the base of the screw head of 1 to 1.2 mm.
Place the router wall-mount slots over the screws and slide the
S 3
TEP
router down until the screws fit snugly into the wall-mount slots.
Cisco RV320/RV325 Gigabit Dual WAN VPN Router Quick Start Guide 3