Back Panel Connectors - Gigabyte GA-B75N User Manual

1-6

Back Panel Connectors

PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
USB 3.0/2.0 Port
The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.
Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.
HDMI Port
port is HDCP compliant and supports Dolby TrueHD and DTS HD Master Audio formats. It also supports
up to 192KHz/24bit 8-channel LPCM audio output. You can use this port to connect your HDMI-
supported audio/video device. The maximum supported resolution is 1920x1200, but the actual
resolutions supported are dependent on the monitor being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system. The screenshot below is from
Windows 7.)
Dual Display Configurations for the Onboard Graphics:
This motherboard provides two video output ports: DVI-I and HDMI. Dual monitor confgurations are supported
in operating system environment only, but not during the BIOS Setup or POST process.
DVI-I Port
The DVI-I port conforms to the DVI-I specification and supports a maximum resolution of 1920x1200 (the
actual resolutions supported depend on the monitor being used).
HDMI (High-Definition Multimedia Interface) is an all-digital audio/video
interface capable of transmitting uncompressed audio/video signals. The HDMI
In Windows 7, select Start>Control Panel>Hardware and
Sound>Sound>Playback, set Intel(R) Display Audio to the
default playback device.
- 12 -