Loading Top Rack - Kenmore 665.1372 Use & Care Manual

The top rack is designed for cups, glasses, and smaller
items. Many items, up to 11" (28 cm), fit in the top rack.
(See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
10 place setting
12 place setting
■ Place items so open ends face down for cleaning and
draining.
Load glasses in top rack only. The bottom rack is not
■
designed for glasses. Damage can occur.
Place cups and glasses in the rows between tines.
■
Placing them over the tines can lead to breakage and
water spots.
China, crystal, and other delicate items must not touch
■
each other during dishwasher operation. Damage may
occur.
■ Load lightweight plastic items in the top rack only. Only
plastic items marked "dishwasher safe" are
recommended.
Load plastic items so the force of the spray does not
■
move them during the cycle.
■ To avoid chipping, do not let stemware touch other
items.
Small bowls, pans, and other utensils can be placed in
■
the top rack. Load bowls in the center section for best
stability.
Cup shelves (on some models)
Fold down the extra shelf on the left-hand or right-hand
side of the top rack to hold additional cups, stemware or
long items such as utensils and spatulas.

Loading Top Rack

NOTE: The features on your dishwasher may vary from
those shown below.
Deluxe adjustable 2-position top rack (on some models)
You can raise or lower the top rack to fit tall items in either
the top or bottom rack. Raise the top rack to
accommodate items up to9" (22 cm) in the top rack and
13" (33 cm) in the bottom rack, or lower the top rack to
accommodate items up to 11" (28 cm) in both the top and
bottom racks. Adjusters are located on each side of the
top rack.
To raise the top rack
Lift the rack on both sides until the rack is level.
NOTE: The top rack must be level.
To lower the top rack
Depress both tabs on rack adjusters, as shown above, and
slide the rack back to its original position.
Standard adjustable 2-position top rack
(on some models)
You can raise or lower the top rack to fit tall items in either
the top or bottom rack. Raise the top rack to
accommodate items up to 9" (22 cm) in the top rack and
13" (33 cm) in the bottom rack, or lower the top rack to
accommodate items up to 11" (28 cm) in both the top and
bottom racks. Two adjusters are located on each side of
the top rack. Each adjuster has 2 preset positions. The
high and low positions are marked on the adjuster.
9